Products engineered for real surfaces.

01 Product portfolio

Find the right solution.

Search by product name or refine the range by application sector. Open any product for a concise technical summary.

×

Super Ultra Plast 5070

High-quality vinyl-acrylic matt paint for interior and exterior mineral surfaces.

Description & applications

For concrete, masonry, stone and plaster. Washable, abrasion-resistant and suitable for brush, roller or spray application.

Technical summary

ColourWhite

Density1.5 ± 0.05 kg/L

Viscosity20–30 poise

pH8–9

Coverage7–8 m²/L/coat

Packaging14 kg

Shelf life2 years

×

Acrylic Emulsion Paint 9090

Premium acrylic emulsion matt finish with strong hiding power, hardness and washability.

Description & applications

A finishing coat for properly prepared interior and exterior surfaces; applied by brush, roller or spray gun.

Technical summary

FinishMatt

ColourWhite

Drying time30–40 minutes

DensityApprox. 1.5 ± 0.1 g/cm³

Recoat time8 hours

Coverage6–8 m²/kg

Shelf life12 months

×

Atlas Glossy

Bright white, high-quality semi-gloss acrylic paint for interior and exterior use.

Description & applications

For cement plaster, concrete, masonry, asbestos, wood and gypsum surfaces after correct preparation.

Technical summary

FinishSemi-gloss

ColourWhite

Density1.26 ± 0.02 kg/L

Viscosity14 ± 1 poise

Coverage8–10 m²/kg/coat

Packaging12 kg

Shelf life12 months

×

Atlas Ready-Mixed Putty

Ready-to-use vinyl-acrylate wall putty for smoothing and repairing interior and exterior surfaces.

Description & applications

Fills pores, holes, fissures and hairline cracks before painting or wallpaper installation.

Technical summary

Density1.75 ± 0.05 kg/L

Viscosity130 ± 10 poise

pH8.5–9.5

Solid content80% ± 1

Packaging1, 5 and 14 kg

Shelf life12 months

×

Glow Plast Latex

Economical matt emulsion paint used as a wall undercoat or a final ceiling coat.

Description & applications

For new and existing cement and gypsum surfaces, with one or more coats according to surface porosity.

Technical summary

ColourWhite

Density1.5 ± 0.03 kg/L

Drying time30–60 min initial; 90 min final

ThinningClean water as required

Packaging9 and 18 kg

Shelf life1 year

×

Pro Sealer Water

Water-based acrylic-styrene sealer that penetrates mineral surfaces and improves paint adhesion and coverage.

Description & applications

For old or new interior and exterior cementitious and gypsum surfaces.

Technical summary

Viscosity125–130

pH8.5–9.5

Density1.4 g/cm³

Coverage11–16 m²

Packaging2.5 L and 9 L

Shelf life2 years

×

Curb & Road Marking Paint

Single-component alkyd road-marking paint with resistance to weather, chemicals and petroleum products.

Description & applications

For streets, roads, garages, car parks, playgrounds and raised traffic markings.

Technical summary

ColourWhite, yellow and black

Solid content≥ 65% by weight

Density1.35 ± 0.02 black; 1.65 ± 0.05 white/yellow

Film thickness150–200 μm WFT

Drying time≤ 1 h surface; ≤ 3 h hard

×

Perla 300 Matt

Matt synthetic alkyd paint in white and colours, formulated for coverage and weather resistance.

Description & applications

For prepared wood, metal and cement surfaces, applied by brush, roller or spray gun.

Technical summary

FinishMatt

ColourWhite and colours

Solid content60% by weight

Drying time1 h initial; 3–4 h final

Coverage6–8 m²/L

Packaging1, 3, 6 and 19 kg

Shelf life2 years

×

Atlas Anticorrosive Primer

Matt anticorrosive primer containing high-quality grey/red iron oxides and resins for strong metal adhesion.

Description & applications

For cars, steel structures, beams, angles, fences, doors, windows and other iron surfaces.

Technical summary

FinishMatt

Solid content50%

Density1.38 ± 0.02 kg/L

Drying time≥ 2 h surface; ≤ 24 h hard

Film thickness60 μm DFT / 100 μm WFT

Coverage6–8 m²/kg/coat

Shelf life2 years

×

Atlas 1K Filler

Fast-drying nitrocellulose-combination filler for fine repair of small vehicle-surface damage before topcoating.

Description & applications

Suitable over sound existing finishes and polyester putties after thorough degreasing.

Technical summary

Mixing ratio1:1 filler to thinner

Coats2 coats

Film thickness40–50 μm DFT

Drying time5 min between coats; sand after 30 min at 20°C

Shelf life2 years

×

Atlas Undercoat

Short-alkyd underbody coating designed to protect vehicles from stone chipping and corrosion.

Description & applications

For rust-free, degreased bare metal, body floors and other vehicle metal parts.

Technical summary

Thinning20% thinner

ApplicationUnderbody gun; 6–8 mm nozzle; 4–5 bar

Coats1–2 coats

Drying time12 h handle; 24 h hard

Shelf life1 year

×

Atlas N.C. Paint — True Duco

Fast-drying nitrocellulose topcoat available in high-gloss or matt finishes with excellent coverage.

Description & applications

For properly prepared metal and wood, including vehicle and furniture repair work.

Technical summary

Mixing ratio1:1 paint to N.C. thinner

Viscosity18–22 sec (Ford 4 at 20°C)

Coats2 full coats

Film thickness40–50 μm DFT

Drying time5–10 min between coats; handle 30 min at 20°C

Shelf life2 years

×

Ultra Seal Nitro Wood Sealer

Clear nitro sealer formulated to fill wood pores, sand easily and create a smooth finishing base.

Description & applications

For furniture, kitchens and other woodwork before the appropriate finishing varnish.

Technical summary

ApplicationSpray gun or cotton pad

Drying time15 min surface; 1.5–2 h hard

Shelf life1 year

×

Atlas White Glue

Bright-white polyvinyl-acetate adhesive that dries to a fully transparent bond line.

Description & applications

For wood, paper, veneer, chipboard, bookbinding, porcelain, fiberglass and general bonding.

Technical summary

ApplicationReady to use

ThinningUp to 10% water only if needed

Drying timeClamp bonded surfaces for 4–6 hours

×

Glossy Fibra Synthetic Enamel

High-gloss alkyd synthetic enamel with strong coverage and a durable, elastic finish.

Description & applications

For prepared wood, metal and plaster, over a suitable primer or undercoat.

Technical summary

ColourWhite and colours

Density1.19 ± 0.05 g/cm³

Solid content60% ± 3

Viscosity110–140 sec (Ford 4)

Drying time3 h surface; 12 h hard

Recoat time18 hours

Coverage8–11 m²/kg/coat

Packaging0.7, 2.15 and 4.2 kg

Shelf life1 year

×

Glossy Alkyd Wood Varnish

Clear high-quality alkyd varnish with high gloss, hardness, adhesion and weather resistance.

Description & applications

For interior furniture, kitchens and other woodwork, on correctly sealed and sanded surfaces.

Technical summary

Thinning10–15% mineral spirit or turpentine

ApplicationBrush or roller

Drying time3–4 h surface; 18 h hard

Coverage10–12 m²/kg at 50–60 μm

Shelf life2 years

×

Nitro Glossy Wood Varnish

Fast-drying clear nitrocellulose varnish with high gloss and resistance to scratching and abrasion.

Description & applications

For furniture, kitchens and other woodwork prepared with a suitable sealer such as Ultra Seal.

Technical summary

ApplicationSpray gun; 1.5–1.8 mm nozzle

Coats2 coats; 5–10 min between coats

Drying time15 min surface; 30 min hard

Coverage6–8 m²/kg at 120–200 μm

Shelf life2 years

×

Fyotek Cornice Adhesive Paste

Ready-to-use water-based adhesive paste with high bond strength for cornices and decorative mouldings.

Description & applications

For polyurethane, polystyrene, gypsum and similar decorative elements, indoors or outdoors.

Technical summary

ColourWhite

Density1.75 ± 0.05 kg/L

Viscosity160 ± 10 poise

pH8.0 ± 0.5

Drying time3–4 hours

Coverage8–10 linear m/kg

Shelf life2 years

×

Polyester Marble Adhesive

Two-component unsaturated-polyester adhesive for bonding, repairing and filling marble, granite and stone.

Description & applications

For stone fabrication, cracks, holes, joints, chipped edges and interior installation of natural or engineered stone.

Technical summary

ColourTransparent paste

Density1.65 ± 0.10 g/cm³

Mixing ratio100 parts adhesive : 2–3 parts BPO hardener

Pot life4–8 minutes at 25°C

Drying timeSand after 20–30 minutes

Full cure24 hours

Application temperature+10°C to +35°C

Service temperature−20°C to +80°C

CoverageTypical consumption 1.0–2.5 kg/m²